-
files/Image_ChatGPT_7_oct._2026_14_39_53.png
-
files/Pitbull-sculpture.png
-
files/pitbull-en-metal-sculpture-geometrique-vue-profil-gauche.png
-
files/statue-chien-pitbull-acier-low-poly-vue-arriere.png
-
files/sculpture-pitbull-metal-origami-low-poly-vue-3-4-avant.png
-
files/low-poly-pitbull-metal-dog-sculpture-top-view.png
-
files/pitbull-metal-sculpture-low-poly-geometric-dog-front-view.png
-
files/pitbull-steel-statue-origami-dog-right-side-view.png
-
files/kit-sculpture-pitbull-metal-a-souder-vue-dessous.png
- Regular price
- €29,90
Besoin d'une date précise ? N'hésitez pas à nous contacter, on vous répond rapidement.
NO PRESS BRAKE REQUIRED
Most of our bending is done by hand. After cutting, we bend with simple tools.
This applies exclusively to sculptures designed and developed by 4A Métal — it does not apply to other products or sculptures resold on this site.
Digital product — sent by email
Standing Pitbull 60 cm — DXF File + PDF Folders
60 cm high · 80 cm long · approximately 7 kg · 1 sheet of 1495 × 600 mm · designed for 1.5 mm sheet metal
Laser-ready DXF cutting file, with bending folder and PDF assembly guide
✓ Designed, cut and assembled in our workshop in France
- DXF cutting file, 111 numbered pieces
- All pieces nested on a 1495 × 600 mm sheet
- Integrated assisted bending lines (no press brake needed)
- PDF bending folder, piece by piece
- PDF assembly guide — numbered views
- Sent by email within a few days
📥 Digital product — no physical parts are shipped. The files are sent to you by email within a few days after your order.
The 4A Métal assisted bending system
Each bend line is laser cut discontinuously: thin slits separated by small steel bridges. These bridges hold the piece and serve as a hinge. We bring the bend to its angle by hand, with a locking pliers, and you control the final angle.
These lines are already integrated into the DXF file: you start the cutting, the bending system comes directly out of the machine.
We design. We cut. We bend. We assemble. Then only, we sell the file.
Material consumption
Only 1 sheet of 1495 × 600 mm
in 1.5 mm thickness — the 111 pieces of the pitbull are nested on a single sheet. You know exactly what to order before starting the cutting.
The pitbull from every angle
360° view of the finished sculpture.
All the power of the pitbull, in steel
Open muzzle, upright ears, gaze into the distance: the pitbull stands straight on its four legs, full of confidence. Its large facets draw the musculature and catch the light differently depending on the time and angle. At 60 cm high and 80 cm long, it has the build of a real dog — and at around 7 kg, it remains easy to move.
What the shipment contains
You don't just receive a plan: everything needed to cut, bend and assemble the pitbull.
File
DXF Cutting Plan
The 111 pieces, numbered and nested on a 1495 × 600 mm sheet, with the assisted bending lines already integrated. Ready to run on your laser cutter.
Folder 1
Bending Folder
One sheet per piece: direction of each bend (towards you or away) and its angle, suggested bending order, identification of welds with neighboring pieces.
Folder 2
Assembly Guide
Numbered views from all angles. Each piece finds its exact position in the sculpture, and the areas using our positioning systems are identified to weld correctly the first time.
Sent by email within a few days after your order. No physical parts are shipped.
Dimensions
- Height60 cm
- Length80 cm
- Width31 cm
- Weight (steel)~7 kg
- Number of pieces111 numbered pieces
- Sheet required1495 × 600 mm
- Sheet thickness1.5 mm
- FormatDXF + 2 PDF folders
Where it makes perfect sense
At the entrance of a house, in a garage or a gym, the pitbull stands guard in style.
For outdoor use, provide a suitable finish (paint, varnish or powder coating) and ground mounting.
What you have left to do
- Cut the pieces with a laser in 1.5 mm sheet metal
- Bend each piece by hand, using the bending folder
- Position the pieces according to the assembly guide
- Tack and then weld each assembly
- Finish the surface according to the desired look (raw, painted, varnished...)
Equipment and skill level
- Laser cutting (or access to a cutting service)
- Pliers, mallet and locking pliers — no press brake
- MIG/MAG welding machine (or TIG for finishing)
- Skill level: accustomed to working with sheet metal and welding
Frequently asked questions
When will I receive the files?
The 3D model of this design is finished. The DXF file and the two PDF folders are sent to you by email within a few days after your order.
How big is the pitbull once assembled?
60 cm high, 80 cm long and 31 cm wide, in 1.5 mm sheet metal.
How much does the pitbull weigh?
Approximately 7 kg in 1.5 mm steel, calculated from the sheet metal surface of the 111 pieces.
How much sheet metal is needed?
Only one sheet of 1495 × 600 mm in 1.5 mm thickness: the 111 pieces are already nested on it in the file.
Do I receive metal parts?
No, it is a digital product. If you want the pieces already cut, take the kit version (see below).
Is a press brake required?
No. The assisted bending lines are integrated into the DXF: after cutting, the pieces are bent by hand with simple tools (pliers, mallet, locking pliers).
What sheet thickness is the file designed for?
The file is designed for 1.5 mm sheet metal. This is the thickness we use in our workshop for this sculpture.
Are the bending and assembly folders provided?
Yes, both are included with the DXF file: a piece-by-piece bending folder and an assembly guide with numbered views.
Can I sell the pitbulls I make?
Yes, you can make and sell pitbulls assembled from this file. However, the DXF file and PDF folders cannot be resold, shared or redistributed (see our license below).
A simple license
You can cut, assemble and sell pitbulls made from this file. The DXF file and PDF folders (bending and assembly) remain the property of 4A Métal: you cannot resell, share or redistribute them, in any form whatsoever.
No laser cutting available? The pitbull is also available as a kit with the pieces already cut in our workshop.
See the kit version →