-
files/tete-de-cerf-sculpture-low-poly.png
-
files/tete-de-cerf-murale-metal-origami-low-poly-deer-head-wall-sculpture-vue-3-4-three-quarter-view.png
-
files/tete-de-cerf-murale-metal-origami-low-poly-deer-head-wall-sculpture-vue-profil-droit-right-side-view.png
-
files/tete-de-cerf-murale-metal-origami-low-poly-deer-head-wall-sculpture-vue-dessus-top-view.png
-
files/tete-de-cerf-murale-metal-origami-low-poly-deer-head-wall-sculpture-vue-dessous-bottom-view.png
-
files/tete-de-cerf-murale-metal-origami-low-poly-deer-head-wall-sculpture-vue-arriere-back-view.png
-
files/tete-de-cerf-murale-metal-origami-low-poly-deer-head-wall-sculpture-vue-profil-gauche-left-side-view.png
-
files/tete-de-cerf-murale-metal-origami-low-poly-deer-head-wall-sculpture-vue-face-front-view.png
-
files/deear-head-dxf.png
- Regular price
- €19,90
Besoin d'une date précise ? N'hésitez pas à nous contacter, on vous répond rapidement.
The 3D model for this item is complete
DXF files and PDF folders sent by email within a few days of your order.
NO BENDING PRESS REQUIRED
Most of our bending is done by hand. After cutting, we bend the pieces using simple tools.
This applies exclusively to sculptures designed and developed by 4A Métal — it does not apply to other products or sculptures resold on this site.
Digital product — sent by email
60 cm Wall-Mounted Deer Head — DXF File + PDF Folders
60 cm high · 54 cm wide · approximately 2.8 kg · 1 sheet of 1495 × 250 mm · designed for 1.5 mm sheet metal
Laser-ready DXF cutting file, with PDF bending folder and assembly guide
✓ Designed, cut, and assembled in our workshop in France
- DXF cutting file, 68 numbered pieces
- All pieces on a 1495 × 250 mm strip
- Integrated assisted bending lines (no bending press needed)
- PDF bending folder, piece by piece
- PDF assembly guide — numbered views
- Sent by email within a few days
📥 Digital product — no physical parts are shipped. The files are sent to you by email within a few days of your order.
The 4A Métal assisted bending system
Each bend line is cut discontinuously by laser: thin slits separated by small steel bridges. These bridges hold the piece and serve as a hinge. We bring the bend to its angle by hand, using locking pliers, and you control the final angle.
These lines are already integrated into the DXF file: you start the cut, and the bending system comes directly out of the machine.
We design. We cut. We bend. We assemble. Then only, we sell the file.
Material consumption
Only 1 sheet of 1495 × 250 mm
at 1.5 mm thickness — the 68 pieces of the deer head are nested on a single sheet of metal. You know exactly what to order before starting the cut.
The deer head from every angle
360° view of the finished sculpture.
A trophy that owes nothing to hunting
The proud head, the antlers spread in a crown above the forehead, the muzzle pointing forward. Mounted on the wall, the deer head literally emerges from the wall: each facet catches the light differently, and the sculpture changes appearance depending on the time and the angle from which you look at it. At 60 cm high and with antlers 54 cm wide, it commands attention in a room without overwhelming it — and at around 2.8 kg, it remains light to hang.
What is included in the delivery
You receive more than just a plan: everything needed to cut, bend, and assemble the deer head.
File
DXF cutting plan
The 68 pieces, numbered and nested on a 1495 × 250 mm strip, with the assisted bending lines already integrated. Ready to run on your laser cutter.
Folder 1
Bending folder
One sheet per piece: the direction of each bend (towards you or away), its angle, the suggested bending order, and the location of welds with neighboring pieces.
Folder 2
Assembly guide
Numbered views from every angle. Each piece finds its exact position in the sculpture, and the areas using our positioning systems are identified so you can weld correctly the first time.
Sent by email within a few days of your order. No physical parts are shipped.
Dimensions
- Height60 cm
- Width (antlers)54 cm
- Depth (distance from the wall)26 cm
- Weight (steel)~2.8 kg
- Number of pieces68 numbered pieces
- Sheet metal required1495 × 250 mm
- Sheet thickness1.5 mm
- FormatDXF + 2 PDF folders
Where it truly comes to life
Above a fireplace, facing the entrance, or behind a counter, the deer head becomes the focal point of the room.
A mounting plate with keyhole slots is integrated into the back of the head. Allow for screws and wall plugs suitable for your wall for approximately 2.8 kg.
What you need to do
- Laser cut the pieces from 1.5 mm sheet metal
- Bend each piece by hand, using the bending folder
- Position the pieces according to the assembly guide
- Tack and then weld each joint
- Finish the surface according to the desired look (raw, painted, varnished...)
- Mount the head on the wall
Equipment and skill level
- Laser cutting (or access to a cutting service)
- Pliers, mallet, and locking pliers — no bending press
- MIG/MAG welding machine (or TIG for finishing)
- Skill level: experienced in working with sheet metal and welding
Frequently asked questions
When will I receive the files?
The 3D model for this item is complete. The DXF file and the two PDF folders are sent to you by email within a few days of your order.
What size is the deer head once assembled?
60 cm high, 54 cm wide at the antlers, and 26 cm deep, made from 1.5 mm sheet metal. It is a wall-mounted sculpture.
How much does the deer head weigh?
Approximately 2.8 kg in 1.5 mm steel (calculated from the sheet metal surface area of the 68 pieces). It easily mounts to the wall thanks to the keyhole plate integrated into the back.
How much sheet metal is needed?
A single 1495 × 250 mm strip of 1.5 mm sheet metal is enough for all the pieces.
Do I receive metal pieces?
No, this is a digital product. If you want the pieces already cut, choose the kit version (see below).
Is a bending press required?
No. The assisted bending lines are integrated into the DXF: after cutting, the pieces are bent by hand using simple tools (pliers, mallet, locking pliers).
What sheet thickness is the file designed for?
The file is designed for 1.5 mm sheet metal. This is the thickness we use in our workshop for this sculpture.
Are the bending and assembly folders provided?
Yes, both are included with the DXF file: a piece-by-piece bending folder and an assembly guide with numbered views.
Can I sell the deer heads I make?
Yes, you can make and sell assembled deer heads from this file. However, the DXF file and PDF folders cannot be resold, shared, or redistributed (see our license below).
A simple license
You can cut, assemble, and sell deer heads made from this file. The DXF file and PDF folders (bending and assembly) remain the property of 4A Métal: you cannot resell, share, or redistribute them in any form.
No laser cutting service available? The deer head is also available as a kit with the pieces already cut in our workshop.
See the kit version →