-
files/tete-sanglier-origami.png
-
files/wild-board-head.png
-
files/tete-de-sanglier-murale-origami-low-poly-sculpture-metal-acier-brut-vue-3-4-droite.png
-
files/tete-sanglier-mural.png
-
files/tete-de-sanglier-mural.png
-
files/tete-de-sanglier-murale-origami-low-poly-sculpture-metal-acier-brut-vue-profil.png
-
files/tete-de-sanglier-murale-origami-low-poly-sculpture-metal-corten-vue-face.png
-
files/tete-de-sanglier-murale-origami-low-poly-sculpture-metal-noir-vue-face.png
-
files/tete-de-sanglier-murale-origami-low-poly-sculpture-metal-acier-brut-vue-profil_9290c853-bd0d-45f1-aa57-21f5f367b7ee.png
-
files/tete-de-sanglier-murale-origami-low-poly-sculpture-metal-acier-brut-vue-3-4-gauche.png
-
files/tete-de-sanglier-murale-origami-low-poly-sculpture-metal-inox-vue-face.png
-
files/tete-de-sanglier-murale-origami-low-poly-sculpture-metal-acier-brut-vue-3-4-droite_2700f364-3f44-4cdd-b3d0-0217a071327a.png
-
files/tete-de-sanglier-murale-origami-low-poly-sculpture-metal-acier-brut-vue-face.png
- Regular price
- €19,90
Besoin d'une date précise ? N'hésitez pas à nous contacter, on vous répond rapidement.
The 3D model for this design is complete
DXF files and PDF folders sent by email shortly after your order.
NO BENDING PRESS REQUIRED
Most of our bending is done by hand. After cutting, we bend it using simple tools.
This applies exclusively to sculptures designed and developed by 4A Métal — it does not apply to other products or sculptures resold on this site.
Digital product — sent by email
Wall-Mounted Boar Head — DXF File + PDF Folders
Wall sculpture · designed for 1.5 mm sheet metal
Laser-ready DXF cut file, with bending folder and PDF assembly guide
✓ Designed, cut, and assembled in our workshop in France
- DXF cut file, all pieces numbered
- Integrated assisted bending lines (no bending press needed)
- PDF bending folder, piece by piece
- PDF assembly guide — numbered views
- Sent by email within a few days
📥 Digital product — no physical parts are shipped. The files are sent to you by email within a few days after your order.
The 4A Métal assisted bending system
Each bend line is cut discontinuously by laser: thin slits separated by small steel bridges. These bridges hold the piece and serve as a hinge. We bring the bend to its angle by hand, with a locking plier, and you control the final angle.
These lines are already integrated into the DXF file: you start the cut, and the bending system comes directly out of the machine.
We design. We cut. We bend. We assemble. Then only, we sell the file.
The boar, faceted version
The snout pointed forward, the massive jowl cut into facets. Mounted on the wall, the boar head has character without the slightest violence: a trophy that owes nothing to hunting. Each facet catches the light differently, and the sculpture changes appearance depending on the time and the angle from which you look at it.
What the delivery contains
You don't just receive a plan: everything needed to cut, bend, and assemble the boar head.
File
DXF cut plan
All pieces, numbered, with the assisted bending lines already integrated. Ready to run on your laser cutter.
Folder 1
Bending folder
One sheet per piece: the direction of each bend (towards you or away), its angle, the suggested bending order, and the identification of welds with neighboring pieces.
Folder 2
Assembly guide
Numbered views from all angles. Each piece finds its exact position in the sculpture, and the areas using our positioning systems are identified so you can weld correctly on the first try.
Sent by email within a few days after your order. No physical parts are shipped.
Specifications
- Typewall sculpture
- Sheet metal thickness1.5 mm
- FormatDXF + 2 PDF folders
Where it truly comes to life
Above a fireplace, in a hunting lodge, or behind a bar counter, the boar head becomes the focal point of the room.
Plan for a wall mounting suitable for the weight of the sculpture and the nature of your wall.
What you have left to do
- Cut the pieces with a laser in 1.5 mm sheet metal
- Bend each piece by hand, using the bending folder
- Position the pieces according to the assembly guide
- Tack and then weld each assembly
- Finish the surface according to the desired look (raw, painted, varnished...)
- Mount the head on the wall
Equipment and skill level
- Laser cutting (or access to a cutting service)
- Pliers, mallet, and locking pliers — no bending press
- MIG/MAG welding machine (or TIG for finishing)
- Skill level: experienced in working with sheet metal and welding
Frequently asked questions
When will I receive the files?
The 3D model for this design is complete. The DXF file and the two PDF folders are sent to you by email within a few days after your order.
Do I receive metal parts?
No, it is a digital product. If you want the pieces already cut, get the kit version (see below).
Is a bending press required?
No. The assisted bending lines are integrated into the DXF: after cutting, the pieces are bent by hand using simple tools (pliers, mallet, locking pliers).
What sheet metal thickness is the file designed for?
The file is designed for 1.5 mm sheet metal.
Are the bending and assembly folders provided?
Yes, both are included with the DXF file: a piece-by-piece bending folder and an assembly guide with numbered views.
Can I sell the boar heads I make?
Yes, you can make and sell assembled boar heads from this file. However, the DXF file and PDF folders cannot be resold, shared, or redistributed (see our license below).
A simple license
You can cut, assemble, and sell boar heads made from this file. The DXF file and PDF folders (bending and assembly) remain the property of 4A Métal: you cannot resell, share, or redistribute them in any form whatsoever.
No laser cutting available? The boar head is also available as a kit with the pieces already cut in our workshop.
See the kit version →