-
files/tete-sanglier-sculpture.png
-
files/tete-sanglier-origami_d3a120d0-f9f6-44bc-ac1f-7bb2757638f6.png
-
files/tete-sanglier-buste.png
-
files/tete-de-sanglier-sur-socle-origami-low-poly-sculpture-metal-acier-brut-vue-3-4-droite.png
-
files/tete-de-sanglier-sur-socle-origami-low-poly-sculpture-metal-acier-brut-vue-face.png
-
files/tete-de-sanglier-sur-socle-origami-low-poly-sculpture-metal-inox-vue-3-4-avant.png
-
files/tete-de-sanglier-sur-socle-origami-low-poly-sculpture-metal-corten-vue-3-4-avant.png
-
files/tete-de-sanglier-sur-socle-origami-low-poly-sculpture-metal-noir-vue-3-4-avant.png
- Regular price
- €19,90
Besoin d'une date précise ? N'hésitez pas à nous contacter, on vous répond rapidement.
DXF files and PDF folders sent by email shortly after your order.
NO BENDING PRESS REQUIRED
Our bends are largely done by hand. After cutting, they are bent using simple tools.
This applies exclusively to sculptures designed and developed by 4A Métal — it does not apply to other products or sculptures resold on this site.
Digital product — sent by email
Boar head on 50 cm base — DXF file + PDF folders
Approximately 50 cm tall · freestanding sculpture · designed for 1.5 mm sheet metal
Laser-ready DXF cutting file, with bending folder and PDF assembly guide
✓ Designed, cut, and assembled in our workshop in France
- DXF cutting file, all pieces numbered
- Integrated assisted bending lines (no bending press needed)
- PDF bending folder, piece by piece
- PDF assembly guide — numbered views
- Sent by email within a few days
📥 Digital product — no physical parts are shipped. The files are sent to you by email within a few days after your order.
The 4A Métal assisted bending system
Each bend line is cut discontinuously by laser: thin slits separated by small steel bridges. These bridges hold the piece and serve as a hinge. The bend is brought to its angle by hand, with locking pliers, and you control the final angle.
These lines are already integrated into the DXF file: you start the cut, and the bending system comes directly out of the machine.
We design. We cut. We bend. We assemble. Then only, we sell the file.
The boar, faceted version
The snout pointed forward, the massive tusk carved into facets, the bust standing on its base. No need for a wall: the boar head sits on a piece of furniture, a console, or a mantelpiece, and can be viewed from every angle. A trophy that owes nothing to hunting. Each facet catches the light differently, and the sculpture changes appearance depending on the time and where you look at it from.
What the delivery contains
You don't just receive a plan: everything needed to cut, bend, and assemble the boar head.
File
DXF cutting plan
All pieces, numbered, with the assisted bending lines already integrated. Ready to go on your laser cutter.
Folder 1
Bending folder
One sheet per piece: direction of each bend (towards you or away), and its angle, suggested bending order, identification of welds with neighboring pieces.
Folder 2
Assembly guide
Numbered views from every angle. Each piece finds its exact position in the sculpture, and the areas using our positioning systems are identified so you can weld correctly the first time.
Sent by email within a few days after your order. No physical parts are shipped.
Dimensions
- Heightapproximately 50 cm
- Typefreestanding sculpture on a base
- Sheet metal thickness1.5 mm
- FormatDXF + 2 PDF folders
Where it truly comes to life
On a mantelpiece, a console, a bookcase, or a counter, the boar head becomes the anchor point of the room.
No wall mounting required: the sculpture sits on its base.
What you have left to do
- Cut the pieces by laser in 1.5 mm sheet metal
- Bend each piece by hand, using the bending folder
- Position the pieces according to the assembly guide
- Tack and then weld each assembly
- Finish the surface according to the desired look (raw, painted, varnished...)
Equipment and skill level
- Laser cutting (or access to a cutting service)
- Pliers, mallet, and locking pliers — no bending press
- MIG/MAG welding station (or TIG for finishing)
- Skill level: experienced in working with sheet metal and welding
Frequently asked questions
When will I receive the files?
The 3D model of this design is finished. The DXF file and the two PDF folders are sent to you by email within a few days after your order.
What size is the boar head on the base once assembled?
Approximately 50 cm tall, in 1.5 mm sheet metal. It is a freestanding sculpture, no need to attach it to the wall.
Do I receive metal parts?
No, it is a digital product. If you want the pieces already cut, take the kit version (see below).
Is a bending press required?
No. The assisted bending lines are integrated into the DXF: after cutting, the pieces are bent by hand with simple tools (pliers, mallet, locking pliers).
For what sheet metal thickness is the file designed?
The file is designed for 1.5 mm sheet metal.
Are the bending and assembly folders provided?
Yes, both are included with the DXF file: a piece-by-piece bending folder and an assembly guide with numbered views.
Can I sell the boar heads I make?
Yes, you can make and sell assembled boar heads from this file. However, the DXF file and PDF folders cannot be resold, shared, or redistributed (see our license below).
A simple license
You can cut, assemble, and sell boar heads on a base made from this file. The DXF file and PDF folders (bending and assembly) remain the property of 4A Métal: you cannot resell, share, or redistribute them in any form whatsoever.
No laser cutting available? The boar head on a base is also available as a kit with the pieces already cut in our workshop.
See the kit version →