-
files/Lion_Roar_650_model_mm_4.png
-
files/lion-dxf.png
-
files/Lion_Roar_650_model_mm_5.png
-
files/Lion_Roar_650_model_mm_8.png
-
files/Lion_Roar_650_model_mm_3.png
-
files/Lion_Roar_650_model_mm_7.png
-
files/Lion_Roar_650_model_mm_2.png
-
files/Lion_Roar_650_model_mm_1.png
-
files/Lion_Roar_650_model_mm_6.png
-
files/infographie-pliage-assiste-4a-metal.png
- Regular price
- €29,90
Besoin d'une date précise ? N'hésitez pas à nous contacter, on vous répond rapidement.
DXF file and PDF guides sent by email upon purchase.
NO BENDING PRESS REQUIRED
Our bends are largely done by hand. After cutting, they are bent using simple tools.
This applies exclusively to sculptures designed and developed by 4A Métal — it does not apply to other products or sculptures resold on this site.
Digital product — sent by email upon purchase
65 cm Roaring Table Lion — DXF File + PDF Guides
65 cm long · 42 cm high · 22 cm wide · 139 numbered pieces · assisted bending
Laser-ready DXF cut file, with PDF bending guide and assembly and construction guide
✓ Designed, cut, and assembled in our workshop in France
- DXF cut file, 139 numbered pieces
- Integrated assisted bending lines (dashed) — no press brake required
- PDF bending guide, piece by piece
- PDF assembly and construction guide — numbered views
- Files sent by email upon purchase
📥 Digital product — no physical pieces are shipped. The files are sent to you by email upon purchase.
The 4A Métal assisted bending system
Each bend line is cut discontinuously with a laser ("dashed line"): thin slits separated by small steel bridges. These bridges hold the piece and serve as a hinge. The bend is brought to its angle by hand, with a locking pliers, and you control the final angle.
These lines are already integrated into the DXF file: you start the cut, the bending system comes directly out of the machine.
We design. We cut. We bend. We assemble. Then only, we sell the file.
The lion from every angle
360° view of the finished sculpture.
A lion roaring on your table
Open mouth, faceted mane, body leaning forward: this roaring lion was designed to sit on a table, sideboard, or shelf. With its 65 cm long by 42 cm high, it has a real presence without taking up too much space. Each facet catches the light differently, and the sculpture changes appearance depending on the time and the angle from which you look at it.
What the shipment contains
You don't just receive a plan: everything needed to cut, bend, and assemble the lion.
File
DXF cut plan
The 139 pieces, numbered, with the assisted bending lines already integrated. Ready to go through your laser cutter.
Guide 1
Bending guide
Piece by piece: the direction of each bend (towards you or away), its angle, and the suggested bending order.
Guide 2
Assembly and construction guide
Numbered views from every angle: each piece finds its exact position in the sculpture, so you can point and weld correctly the first time.
Sent by email upon purchase. No physical pieces are shipped.
Dimensions
- Length65 cm
- Height42 cm
- Width22 cm
- Number of pieces139 numbered pieces
- Bendingassisted bending (dashed line)
- FormatDXF + PDF guides
Where it truly comes to life
On a coffee table, sideboard, desk, or shelf, the lion catches everyone's eye.
What you have left to do
- Cut the 139 pieces with a laser
- Bend each piece by hand, using the bending guide
- Position the pieces according to the assembly guide
- Point and then weld each joint
- Finish the surface according to the desired look (raw, painted, varnished...)
Equipment and skill level
- Laser cutting (or access to a cutting service)
- Pliers, mallet, and locking pliers — no press brake
- MIG/MAG welding station (or TIG for finishing)
- Skill level: accustomed to working with sheet metal and welding
Frequently asked questions
When will I receive the files?
The 3D model of this piece is finished. The DXF file and PDF guides are sent to you by email upon purchase.
How big is the lion once assembled?
65 cm long, 42 cm high, and 22 cm wide. It is a table sculpture.
How many pieces are in the file?
139 pieces, all numbered, so you can easily keep track during bending and assembly.
Do I receive metal pieces?
No, it is a digital product. If you want the pieces already cut, get the kit version (see below).
Is a press brake required?
No. The assisted bending lines (dashed line) are integrated into the DXF: after cutting, the pieces are bent by hand using simple tools (pliers, mallet, locking pliers).
What cutting gas do you recommend?
In our workshop, we cut this lion with a fiber laser using nitrogen: the edges come out clean and without oxidation, which makes bending and welding easier.
Can I sell the lions I make?
Yes, you can make and sell assembled lions from this file. However, the DXF file and PDF guides cannot be resold, shared, or redistributed (see our license below).
A simple license
You can cut, assemble, and sell lions made from this file. The DXF file and PDF guides (bending, assembly, and construction) remain the property of 4A Métal: you cannot resell, share, or redistribute them in any form.
No laser cutting available? The lion is also available as a kit with the pieces already cut in our workshop.
See the kit version →