files/table-de-soudure.webp
files/table-soudure-avec-rebord.webp
files/table-soudure-made-in-france.webp
files/table-soudure-fabrication.webp
files/roulette-table-de-soudure.webp
files/desous-de-table-de-soudure.webp
files/assemblage-table-de-soudure.webp
files/decoupe-laser-table-de-soudure.webp
files/table-de-soudure-en-kit.webp
files/table-de-soudure-a-assembler.webp
files/pied-table-de-soudure.webp
files/table-de-soudage-en-kit.webp
The visuals show a 600 mm deep table. The product delivered depends on the selected configuration.
A compact and rigid welding table, positioned as an entry-level product, in an elongated format ideal for workshops that lack space but require a real professional workbench.
The 600 Ă 1500 mm 4A Metal welding table offers a work surface of 0.9 mÂČ, the most compact format in the long range. Its 6 mm S235JR pickled steel top, its 150 mm peripheral rim, and its Ă16 mm grid with 50 mm spacing offer the same clamping precision as our wider models.
Manufactured in our workshops in Romilly-sur-Seine, in the Aube region, it is available as a top only or as a complete table, in a welding kit or already welded in our workshops.
Compact, but not a minimalist top.
With its 1.5 meters in length and 0.6 meters in width, this table easily fits into a small workshop or garage, without sacrificing top thickness or clamping system.
The 600 Ă 1500 mm welding table is available in four configurations. You can choose to do the welding yourself to control your budget, or receive a set already welded and prepared in our workshops.
You receive all the necessary cut parts for manufacturing the top: upper surface, 150 mm peripheral rims, and internal reinforcements.
The top is positioned, adjusted, and welded in our workshops. It can then be installed on your own frame, workbench, or base.
You receive the top in kit form, as well as the base, plates, casters, and screws necessary for manufacturing the complete table.
The top and welded elements are prepared in our workshops. Upon receipt, only the legs and casters need to be bolted according to the delivered configuration.
| Included elements | Top in kit | Welded top | Complete table in kit | Complete table welded |
|---|---|---|---|---|
| Laser-cut parts | â | â | â | â |
| Top welded by 4A Metal | â | â | â | â |
| 6 legs and plates | â | â | â | â |
| Leg mounting jigs | â | â | â | Not necessary |
| Casters | â | â | â | â |
| Assembly screws | â | â | â | â |
| Welding required upon receipt | Yes | No | Yes | No |
The 600 Ă 1500 table uses precisely cut parts and various positioning systems facilitating the placement of the top and base.
Kit versions are delivered with holding clamps and threaded rods. These allow the elements to be pressed against each other, to hold the structure during tacking, and to limit movements related to welding.
The rims and reinforcements are positioned under the top thanks to the cuts, slots, and markers provided during design.
Clamps and threaded rods allow the various parts to be pressed together and maintain a regular assembly during tacking.
The supplied jigs fit the square tube to center the upper and lower plates of the six legs before tacking and welding.
The top and base can then be tacked and progressively welded, alternating areas to better control thermal deformations.
Controlled flatness: the mounting system allows the various parts to be pressed before welding and to obtain a regular geometry. The final result also depends on respecting the tacking order, weld distribution, and heat input control.
The guided assembly does not stop at the top. In the complete table in welding kit version, specially cut jigs are also provided to facilitate the positioning of the plates on the six square tube legs.
These jigs match the outer shape of the tube to center the plates, hold them in the axis of the leg, and simplify their tacking before welding.
A first jig allows positioning and centering the upper plate on the square tube. This plate is then used to bolt the leg under the table top.
A second jig allows positioning the lower plate, located at the other end of the leg and intended to receive the caster.
A kit designed to be truly assembled: the jigs prevent the customer from having to manually measure and trace the centering of each plate, on all six legs.
With its 6 mm top, 150 mm peripheral rims, and rigid structure, this table easily withstands repeated tacking, clamping, and welding. Its length of 1500 mm offers a comfortable workspace for long parts or assembly setups, while remaining compact and easy to move.
It features the same 6 mm top, 150 mm rim, and Ă16 mm grid as the rest of the range â only the width changes, for a more accessible price.
A comfortable workspace for long parts and assembly setups.
A width that reduces floor space and facilitates table movement.
6 mm steel, 150 mm rim, Ă16 mm grid with 50 mm spacing: no compromise on structural characteristics.
Suitable for demanding artisans, ironworkers, metalworkers, and DIY enthusiasts who lack space.
The rigidity of the table does not depend solely on the thickness of its top. It also relies on its peripheral rim, internal spacers, and the distribution of its base.
The 600 Ă 1500 mm table rests on six 60 Ă 60 mm square steel tube legs, distributed under the structure to support the top and improve overall stability.
| Top dimensions | 600 Ă 1500 mm |
|---|---|
| Work surface | 0.9 mÂČ |
| Overall height | Approximately 900 mm with base and casters |
| Material | S235JR pickled steel |
| Top thickness | 6 mm |
| Rim height | 150 mm all around |
| Hole diameter | Ă16 mm |
| Hole spacing | 50 mm |
| Internal reinforcements | Spacers distributed under the top |
| Legs | 60 Ă 60 mm square steel tube, 3 mm thick |
| Number of legs | 6 legs distributed under the table |
| Upper leg fastening | Plates welded to the tubes then bolted under the top |
| Lower fastening | Plates welded under the legs to receive the casters |
| Leg assembly aid | Jigs provided for centering the upper and lower plates on the six square tubes, in the complete table kit version |
| Casters | Ă155 mm industrial casters with double brake, depending on the selected option |
| Screws | Galvanized steel screws provided according to configuration |
| Configurations | Top in kit, welded top, complete table in kit or complete welded table |
| Manufacturing | Design, cutting, and manufacturing in our workshops in Romilly-sur-Seine, in the Aube region |
| Finish | Raw pickled steel, unpainted |
Raw steel may show differences in shade, handling marks, superficial marks, or natural oxidation beginnings. These characteristics are inherent to a raw metal product intended for workshop use.
The upper surface and peripheral rims are perforated with 16 mm diameter holes, distributed at a regular spacing of 50 mm.
This network allows the use of various clamping accessories and multiplies positioning points across the entire table.
The regular grid allows stops, squares, and accessories to be placed at different points on the table.
Clamps, presses, and Ă16 mm pins allow elements to be held during inspection, tacking, and assembly.
The 150 mm perforated peripheral rim also allows work on all four sides of the table.
The repetition of holes facilitates the creation of jigs, reproducible positions, and small series.
The peripheral rim forms a continuous belt on all four sides of the table. It contributes to the overall rigidity of the top and complements the internal structure.
Its height of 150 mm also offers a lateral surface for clamping parts vertically or directly against the edge of the table.
This is the perfect table for demanding artisans, ironworkers, metalworkers, and DIY enthusiasts who want a reliable and durable workbench, without paying the price of major industrial brands.
A compact format suitable for small workshops and garages with limited space.
For tacking, clamping, and repeated welding on common parts.
An accessible professional workbench for personal projects and learning.
The 600 Ă 1500 mm welding table is developed and manufactured by 4A MĂ©tal in our workshops in Romilly-sur-Seine, in the Aube region.
We master the main stages of its manufacturing: file preparation, nesting, laser cutting, adjustment, assembly, welding, and control of the prepared elements.
The different parts are cut on our fiber laser to obtain regular shapes, clean holes, and consistent positioning during assembly.
Pickled steel offers a cleaner surface than heavily scaled black steel and facilitates preparation as well as welding operations.
The position of the holes, reinforcements, legs, plates, and mounting systems is defined in our own manufacturing files.
You buy your table directly from the French company that designs, cuts, and manufactures it â without intermediaries, hence a more accessible factory price.
Discover our tables in real conditions: manufacturing, rigidity, and professional use, without staging.
The table is delivered in raw pickled steel. Like any unpainted steel, it can naturally oxidize upon contact with humidity, condensation, or water splashes.
To maintain a clean work surface, we recommend storing the table in a dry place, cleaning it regularly, and applying a protection compatible with welding work.
The kit tabletop is delivered in parts to be welded. The welded tabletop is assembled in our workshops, without legs. The complete kit table includes the tabletop, 6 legs, plates, castors, and screws, but requires welding. The complete welded table is prepared in the workshop and only requires the bolted assembly of the elements provided for this purpose.
Its reduced width (600 mm instead of 900 or 1200 mm) requires less material and occupies less floor space, which allows for a more accessible price. The tabletop thickness, edge, and clamping system remain identical to the rest of the range.
The tabletop measures 600 Ă 1500 mm, for a total working surface of 0.9 mÂČ.
Yes. The tabletop is made of 6 mm thick pickled S235JR steel, identical to other models in the range.
The holes have a diameter of 16 mm and are spaced evenly at 50 mm.
The table is designed to accommodate accessories compatible with the Ă16 mm system: clamps, stops, squares, presses, pins, and other positioning elements. Check the exact dimensions of the accessories before purchase.
The complete kit table is delivered with positioning templates specially cut to fit the square tube of the legs. A first template centers the upper plate, intended to be bolted under the tabletop. A second centers the lower plate, intended to receive the castor.
Yes. Ă155 mm industrial castors with double brakes are offered depending on the chosen configuration. Given the weight of the table, handling must always be done with caution.
No. It is delivered in raw pickled steel. Regular protection and maintenance are recommended to limit the appearance of superficial oxidation.
It is designed, cut, and manufactured by 4A MĂ©tal in our workshops in Romilly-sur-Seine, in the Aube region.
Delivery can be arranged in France and several European countries. Conditions depend on the configuration, weight, volume, and destination address.
The 600 Ă 1500 mm welding table combines a 0.9 mÂČ work surface, a 6 mm pickled S235JR steel top, a Ă16 mm clamping system with 50 mm spacing, and a 150 mm peripheral edge.
Available as a tabletop only or as a complete table, in kit or welded, it allows everyone to choose the level of preparation corresponding to their equipment, their budget, and their desire to participate in the manufacturing.
Compact and easy to move, it offers the same level of equipment as the rest of the range, for working, learning, and progressing daily.
4A MĂ©tal Welding Table â 600 Ă 1500 mm Series
French manufacturing âą 6 mm steel âą Ă16 mm clamping âą Direct factory price