files/table-soudage-pas-cher.webp
files/table-de-soudure-acier.webp
files/table-soudure-fabrication.webp
files/table-soudure-made-in-france.webp
files/roulette-table-de-soudure.webp
files/desous-de-table-de-soudure.webp
files/assemblage-table-de-soudure.webp
files/decoupe-laser-table-de-soudure.webp
files/table-de-soudure-en-kit.webp
files/table-de-soudure-a-assembler.webp
files/pied-table-de-soudure.webp
files/table-de-soudage-en-kit.webp
The visuals show a 600 mm deep table. The delivered product depends on the selected configuration.
A long and compact welding table, positioned at the entry-level, designed for professionals who need a long working length while maintaining a reduced width.
The 600 × 2100 mm 4A Métal welding table offers a work surface of 1.26 m² distributed over 2.1 meters in length. Its 6 mm S235JR pickled steel top, its 150 mm peripheral edge, and its Ø16 mm grid with 50 mm spacing offer the same clamping precision as our wider models, in a more accessible format.
Manufactured in our workshops in Romilly-sur-Seine, in the Aube region, it is available as a top only or as a complete table, in a weld-it-yourself kit or already welded in our workshops.
The length/price compromise of the range.
With its 2.1 meters in length and only 0.6 meters in width, this table targets long assemblies and heavy clamping while limiting the material used — and thus the price — without changing the steel thickness or clamping system.
The 600 × 2100 mm welding table is available in four configurations. You can choose to do the welding yourself to control your budget, or receive an assembly already welded and prepared in our workshops.
You receive all the cut pieces needed to manufacture the top: top surface, 150 mm peripheral edges, and internal reinforcements.
The top is positioned, adjusted, and welded in our workshops. It can then be installed on your own chassis, workbench, or base.
You receive the top as a kit, as well as the base, plates, castors, and screws needed to manufacture the complete table.
The top and welded elements are prepared in our workshops. Upon receipt, only the legs and castors need to be bolted according to the delivered configuration.
| Included elements | Top as a kit | Welded top | Complete table as a kit | Complete table, welded |
|---|---|---|---|---|
| Laser-cut parts | ✓ | ✓ | ✓ | ✓ |
| Top welded by 4A Métal | — | ✓ | — | ✓ |
| 6 legs and plates | — | — | ✓ | ✓ |
| Leg assembly templates | — | — | ✓ | Not necessary |
| Castors | — | — | ✓ | ✓ |
| Assembly screws | — | — | ✓ | ✓ |
| Welding required upon receipt | Yes | No | Yes | No |
On a 2.1-meter long top that is only 0.6 meters wide, assembly rigor is essential. The 600 × 2100 table uses precisely cut parts and different positioning systems to facilitate the placement of the top and base.
Kit versions are delivered with holding clamps and threaded rods. These allow the elements to be pressed against each other, maintain the structure during tacking, and limit movement due to welding.
The edges and reinforcements are positioned under the top thanks to the cutouts, recesses, and marks provided during design.
Clamps and threaded rods allow the different parts to be pressed together and maintain a consistent assembly along the entire length during tacking.
The supplied templates fit the square tube to center the upper and lower plates of the six legs before tacking and welding them.
The top and base can then be tacked and progressively welded, alternating zones along the length to better control thermal deformations.
Controlled flatness: the assembly system allows the different parts to be pressed together before welding and to obtain a regular geometry. On a long and narrow format, the final result particularly depends on respecting the tacking order and the distribution of welds along the entire length.
Guided assembly doesn't stop at the top. In the complete table as a weld-it-yourself kit version, specially cut templates are also provided to facilitate the positioning of the plates on the six square tube legs.
These templates match the outer shape of the tube to center the plates, hold them in the axis of the leg, and simplify their tacking before welding — a valuable guide for reproducing the same assembly six times identically over the 2100 mm length.
A first template allows positioning and centering the upper plate on the square tube. This plate is then used to bolt the leg under the table top.
A second template allows positioning the lower plate, located at the other end of the leg and intended to receive the castor.
A kit designed to be truly assembled: the templates save the customer from having to manually measure and mark the centering of each plate on all six legs.
Thanks to its 2.1-meter length and reinforced structure, this table can handle structural welding, long assemblies, mounting, and heavy clamping without faltering. The 150 mm peripheral edge limits any risk of torsion, even under high loads.
It features the same 6 mm top, the same 150 mm edge, and the same Ø16 mm grid as the rest of the range — only the width changes, for a more accessible price.
A comfortable base for long assemblies, structural welding, and heavy clamping.
A width that reduces floor space and material quantity, thus the price, without reducing the top thickness.
6 mm steel, 150 mm edge, Ø16 mm grid with 50 mm spacing: no compromise on structural characteristics.
Suitable for ironworkers, metalworkers, welding workshops, and training centers.
A table 2100 mm long and only 600 mm wide must be designed as a complete unit: on this elongated format, rigidity heavily depends on the peripheral edge, internal reinforcements, and the distribution of the base.
The 600 × 2100 mm table rests on six 60 × 60 mm square steel tube legs, distributed along the length to support the structure and improve the overall stability of the assembly.
Exact number of longitudinal and transverse reinforcements to be confirmed before publication — same remark as on previous datasheets.
| Tabletop dimensions | 600 × 2100 mm |
|---|---|
| Work surface | 1.26 m² |
| Overall height | Approximately 900 mm with base and castors |
| Material | S235JR pickled steel |
| Tabletop thickness | 6 mm |
| Edge height | 150 mm all around |
| Hole diameter | Ø16 mm |
| Hole spacing | 50 mm |
| Internal reinforcements | Longitudinal and transverse braces distributed under the tabletop |
| Legs | 60 × 60 mm square steel tube, 3 mm thick |
| Number of legs | 6 legs distributed under the table |
| Upper leg attachment | Plates welded to the tubes then bolted under the tabletop |
| Lower attachment | Plates welded under the legs to receive the castors |
| Leg assembly aid | Templates provided for centering the upper and lower plates on the six square tubes, in the complete table kit version |
| Castors | Ø155 mm industrial castors with double brake, depending on the selected option |
| Screws | Galvanized steel screws supplied according to configuration |
| Configurations | Tabletop kit, welded tabletop, complete table kit or complete welded table |
| Manufacture | Design, cutting, and manufacture in our workshops in Romilly-sur-Seine, in the Aube region |
| Finish | Raw pickled steel, unpainted |
Raw steel may exhibit color variations, handling marks, superficial marks, or natural oxidation. These characteristics are inherent to a raw metal product intended for workshop use.
The top surface and peripheral edges are perforated with 16 mm diameter holes, distributed with a regular 50 mm spacing.
This network allows the use of various clamping accessories and multiplies the positioning points along the entire length of the table.
The regular grid allows stops, squares, and accessories to be placed at different locations along the 2100 mm length.
Clamps, presses, and Ø16 mm pins allow elements to be held during inspection, tacking, and assembly.
The 150 mm perforated peripheral edge also allows working on all four sides of the table.
The repetition of holes facilitates the creation of templates, reproducible positions, and small series.
The peripheral edge forms a continuous belt on all four sides of the table. It contributes to the overall rigidity of the top and completes the internal structure—a particularly important point on such a long and narrow format.
Its 150 mm height also provides a side surface for clamping parts vertically or directly against the edge of the table.
The 600 × 2100 mm Series is tailored for structural welding, long assemblies, heavy mounting and clamping, as well as intensive grinding.
Suitable for ramps, handrails, frames, and elongated metal structures.
For assembling chassis, technical frames, and long tubular structures.
A practical secondary station for working on long parts, tacking, and checking diagonals.
The 600 × 2100 mm welding table is developed and manufactured by 4A Métal in our workshops in Romilly-sur-Seine, in the Aube region.
We master the main stages of its manufacture: file preparation, nesting, laser cutting, adjustment, assembly, welding, and control of the prepared elements.
The different parts are cut on our fiber laser to obtain regular shapes, clean holes, and consistent positioning during assembly.
Pickled steel offers a cleaner surface than heavily scaled black steel and facilitates preparation and welding operations.
The position of the holes, reinforcements, legs, plates, and mounting systems is defined in our own manufacturing files.
You buy your table directly from the French company that designs, cuts, and manufactures it—without intermediaries, hence a more affordable factory price.
No staging. We present our products as they are actually manufactured and used: preparation, laser cutting, assembly, welding, and workshop work.
The table is delivered in raw pickled steel. Like any unpainted steel, it can naturally oxidize on contact with humidity, condensation, or water splashes.
To maintain a clean work surface, we recommend storing the table in a dry place, cleaning it regularly, and applying a protection compatible with welding work.
The kit top is delivered in parts to be welded. The welded top is assembled in our workshops, without a base. The complete table kit includes the top, 6 legs, plates, casters, and hardware, but requires welding. The complete welded table is prepared in the workshop and only requires the bolted assembly of the elements provided for this purpose.
Its reduced width (600 mm instead of 900 or 1200 mm) requires less material and takes up less floor space, which allows for a more accessible price. The thickness of the top, the edge, and the clamping system remain identical to the rest of the range.
The top measures 600 × 2100 mm, for a total working surface area of 1.26 m².
Yes. The top is made of 6 mm thick pickled S235JR steel, identical to other models in the range.
The holes have a diameter of 16 mm and are spaced at regular intervals of 50 mm.
The table is designed to accommodate accessories compatible with the Ø16 mm system: clamps, stops, squares, presses, pins, and other positioning elements. Check the exact dimensions of the accessories before purchase.
The complete table kit comes with positioning templates specially cut to fit the square tube of the legs. A first template centers the upper plate, intended to be bolted under the top. A second centers the lower plate, intended to receive the caster.
On such a long format (2100 mm), six legs allow for better distribution of support along the entire length and limit the flexion of the top, despite a reduced width of 600 mm.
Yes. Industrial Ø155 mm casters with double brakes are offered depending on the chosen configuration. Given the length and weight of the table, handling must always be done by several people and with caution.
No. It is delivered in raw pickled steel. Regular protection and maintenance are recommended to limit the appearance of superficial oxidation.
It is designed, cut, and manufactured by 4A Métal in our workshops in Romilly-sur-Seine, in the Aube region.
Delivery can be arranged in France and several European countries. Conditions depend on the configuration, weight, volume, and destination address. Given the length of the package (2100 mm), check access constraints at your delivery address.
The 600 × 2100 mm welding table combines a 1.26 m² work surface spread over a good length, a 6 mm thick pickled S235JR steel top, a Ø16 mm clamping system with 50 mm spacing, and a 150 mm peripheral edge.
Available as a standalone top or a complete table, in kit or welded, it allows everyone to choose the level of preparation corresponding to their equipment, budget, and desire to participate in the manufacturing.
Supported by six 60 × 60 mm square steel tube legs distributed along the entire length, it offers the same level of equipment as the rest of the range, in a more accessible format.
4A Métal Welding Table – 600 × 2100 mm Series
French manufacturing • 6 mm steel • Ø16 mm clamping • Direct factory price