files/table-de-soudure_552976c1-8fda-4c37-a0da-d03a6c5d8a79.webp
files/table-de-soudage.webp
files/table-de-soudure-en-kit_278ca270-9a48-4398-a103-55543b487324.webp
files/table-soudure.webp
files/table-atelier-soudure.webp
files/pied-table-de-soudure_4df55370-8a8a-44a4-aea0-f87cfc7b7fbc.webp
files/table-de-soudure-profondeur-900.webp
files/roulette-table-de-soudure.webp
files/desous-de-table-de-soudure.webp
files/assemblage-table-de-soudure.webp
files/decoupe-laser-table-de-soudure.webp
files/table-de-soudure-en-kit.webp
files/table-de-soudure-a-assembler.webp
files/pied-table-de-soudure.webp
files/table-de-soudage-en-kit.webp
Visuals show a 900mm deep table. The delivered product depends on the selected configuration.
A professional welding table designed for long and demanding tasks: chassis, frames, gates, tubular structures, and welded assemblies.
The 4A Métal 900 × 2400 mm welding table offers a work surface of 2.16 m² spread over a long length, ideal for parts that quickly exceed the capabilities of a classic workbench without requiring significant width. Its 6 mm pickled S235JR steel top, its 150 mm peripheral rim, and its Ø16 mm grid with a 50 mm center distance provide excellent positioning precision.
Manufactured in our workshops in Romilly-sur-Seine, in the Aube region, it is available as a top only or as a complete table, in a kit to be welded or already welded in our workshops.
A format designed for length.
With its 2.4 meters in length and 0.9 meter in width, this table is particularly suitable for long and thin parts: tubes, profiles, elongated frames, railings, and linear structures.
The 900 × 2400 mm welding table is available in four configurations. You can choose to do the welding yourself to control your budget, or receive an assembly already welded and prepared in our workshops.
You receive all the cut pieces needed to make the top: upper surface, 150 mm peripheral rims, and internal reinforcements.
The top is positioned, adjusted, and welded in our workshops. It can then be installed on your own chassis, workbench, or base.
You receive the top as a kit as well as the base, plates, castors, and screws needed to build the complete table.
The top and welded elements are prepared in our workshops. Upon receipt, only the legs and castors need to be bolted according to the delivered configuration.
| Included elements | Top as kit | Welded top | Complete table as kit | Complete table welded |
|---|---|---|---|---|
| Laser-cut parts | ✓ | ✓ | ✓ | ✓ |
| Top welded by 4A Métal | — | ✓ | — | ✓ |
| 6 legs and plates | — | — | ✓ | ✓ |
| Leg assembly templates | — | — | ✓ | Not necessary |
| Castors | — | — | ✓ | ✓ |
| Assembly screws | — | — | ✓ | ✓ |
| Welding required upon receipt | Yes | No | Yes | No |
On a top 2.4 meters long and only 0.9 meter wide, positioning the parts before welding requires rigor: the longer and narrower the assembly, the more deviations can accumulate. This is why the 900 × 2400 table uses precisely cut parts and various positioning systems that facilitate the placement of the top and base.
Kit versions are supplied with holding clamps and threaded rods. They allow elements to be clamped against each other, the structure to be held during tack welding, and movements related to welding to be limited.
The rims and reinforcements are positioned under the top thanks to the cuts, housings, and markings provided during design.
Clamps and threaded rods allow the various parts to be pressed together and maintain a consistent assembly along the entire length during tack welding.
The supplied templates fit the square tube to center the upper and lower plates of the six legs before tack welding and final welding.
The top and base can then be tack welded and then progressively welded, alternating zones along the length to better control thermal deformations.
Controlled flatness: the assembly system allows the various parts to be pressed together before welding and to obtain a regular geometry. On a long and narrow format, the final result also depends on respecting the tack welding order, the distribution of welds along the entire length, and controlling heat input.
Guided assembly doesn't stop at the top. In the complete table as a welding kit version, specially cut templates are also supplied to facilitate the positioning of the plates on the six square tube legs.
These templates match the outer shape of the tube to center the plates, keep them aligned with the leg, and simplify their tack welding before final welding — a valuable reference for reproducing the same assembly six times identically over the 2400 mm length.
A first template allows positioning and centering the upper plate on the square tube. This plate is then used to bolt the leg under the table top.
A second template allows positioning the lower plate, located at the other end of the leg and intended to receive the castor.
A kit designed to be truly assembled: the templates save the customer from having to manually measure and mark the centering of each plate on all six legs distributed under the 2400 mm length.
Some jobs do not require great width, but great length: tubes, profiles, elongated frames, railings, handrails, and linear structures. The 900 × 2400 mm format precisely meets this need without occupying the floor space of a very wide table.
It allows for limiting overhangs, multiplying clamping points along the length, and keeping more parts directly on the work surface.
The 2.4 meters of length provide a suitable base for long and thin parts requiring several successive holding points.
A controlled width that limits floor space while remaining sufficient for most common assemblies.
The available length allows more elements to be kept on the table during adjustment, tack welding, and inspection.
This table can become the reference workstation for tubes, profiles, and linear structures in a workshop.
A table 2400 mm long and only 900 mm wide must be designed as a complete unit: on an elongated and narrow format, rigidity strongly depends on the peripheral rim, internal reinforcements, and leg distribution.
The 900 × 2400 mm table rests on six 60 × 60 mm square steel tube legs, distributed along the length to support the structure and improve the overall stability of the assembly.
Exact number of longitudinal and transversal reinforcements to be confirmed before publication — same remark as on previous datasheets.
| Top dimensions | 900 × 2400 mm |
|---|---|
| Work surface | 2.16 m² |
| Total height | Approximately 900 mm with base and castors |
| Material | Pickled steel S235JR |
| Top thickness | 6 mm |
| Rim height | 150 mm all around |
| Hole diameter | Ø16 mm |
| Hole center distance | 50 mm |
| Internal reinforcements | Longitudinal and transversal spacers distributed under the top |
| Legs | 60 × 60 mm square steel tube, 3 mm thick |
| Number of legs | 6 legs distributed under the table |
| Upper leg fastening | Plates welded to the tubes then bolted under the top |
| Lower fastening | Plates welded under the legs to receive the castors |
| Leg assembly aid | Templates supplied for centering the upper and lower plates on the six square tubes, in the complete table kit version |
| Castors | Ø155 mm industrial castors with double brake, depending on the selected option |
| Hardware | Galvanized steel hardware supplied according to configuration |
| Configurations | Top as kit, welded top, complete table as kit or complete table welded |
| Manufacture | Design, cutting, and manufacture in our workshops in Romilly-sur-Seine, in the Aube region |
| Finish | Raw pickled steel, unpainted |
Raw steel may show differences in shade, handling marks, superficial marks, or natural oxidation beginnings. These characteristics are inherent to a raw metal product intended for workshop use.
The upper surface and peripheral rims are perforated with 16 mm diameter holes, distributed with a regular 50 mm center distance.
This network allows the use of various clamping accessories and multiplies positioning points along the entire length of the table.
The regular grid allows stops, squares, and accessories to be placed at different locations along the 2400 mm length.
Ø16 mm clamps, presses, and pins hold elements during inspection, tack welding, and assembly.
The 150 mm perforated peripheral rim also allows working on all four sides of the table.
The repetition of holes facilitates the creation of templates, reproducible positions, and small batches.
The peripheral edge forms a continuous belt on all four sides of the table. It contributes to the overall rigidity of the top and complements the internal structure — a particularly important point on a long and relatively narrow format.
Its 150 mm height also provides a lateral surface for clamping parts vertically or directly against the edge of the table.
The 900 × 2400 mm format is intended for users who regularly work on long and thin parts that do not require significant width.
For assembling chassis, technical frames, tubular structures, and elongated welded assemblies.
Suitable for gates, railings, handrails, frames, and elongated metal structures.
A practical surface for working on tubes and profiles, tacking, and checking diagonals.
The 900 × 2400 mm welding table is developed and manufactured by 4A Métal in our workshops in Romilly-sur-Seine, in Aube.
We control the main stages of its manufacture: file preparation, nesting, laser cutting, adjustment, assembly, welding, and inspection of the prepared elements.
The various parts are cut on our fiber laser to obtain regular shapes, clean holes, and consistent positioning during assembly.
Pickled steel offers a cleaner surface than heavily scaled black steel and facilitates preparation as well as welding operations.
The position of the holes, reinforcements, legs, plates, and mounting systems is defined in our own manufacturing files.
You buy your table directly from the French company that designs, cuts, and manufactures it.
No staging. We present our products as they are actually manufactured and used: preparation, laser cutting, assembly, welding, and workshop work.
The table is delivered in raw pickled steel. Like any unpainted steel, it can naturally oxidize upon contact with humidity, condensation, or water splashes.
To maintain a clean work surface, we recommend storing the table in a dry place, cleaning it regularly, and applying protection compatible with welding work.
The kit top is delivered in parts to be welded. The welded top is assembled in our workshops, without a frame. The complete table kit includes the top, 6 legs, plates, casters, and hardware, but requires welding. The complete welded table is prepared in the workshop and only requires the bolted assembly of the elements provided for this purpose.
This format is particularly suitable for work on long and thin parts (tubes, profiles, elongated frames) that do not require great width. It takes up less floor space than a 1200 mm wide table while offering a comfortable working length.
The top measures 900 × 2400 mm, for a total working surface of 2.16 m².
Yes. The top is made of 6 mm thick pickled S235JR steel.
The holes have a diameter of 16 mm and are distributed with a regular spacing of 50 mm.
The table is designed to accommodate accessories compatible with the Ø16 mm system: clamps, stops, squares, presses, pins, and other positioning elements. Check the exact dimensions of the accessories before purchase.
The complete table kit is delivered with positioning templates specially cut to fit the square tube of the legs. A first template centers the upper plate, intended to be bolted under the top. A second centers the lower plate, intended to receive the caster.
On such a long format (2400 mm), six legs allow for better support distribution along the entire length and limit deflection of the top, even if the width remains compact.
Yes. Ø155 mm industrial casters with double brakes are offered depending on the chosen configuration. Given the length and weight of the table, handling should always be done by several people and with caution.
No. It is delivered in raw pickled steel. Regular protection and maintenance are recommended to limit the appearance of surface oxidation.
It is designed, cut, and manufactured by 4A Métal in our workshops in Romilly-sur-Seine, in Aube.
Delivery can be arranged in France and several European countries. Conditions depend on the configuration, weight, volume, and destination address. Given the length of the package (2400 mm), check the access constraints at your delivery address.
The 900 × 2400 mm welding table combines a 2.16 m² work surface spread over a great length, a 6 mm pickled S235JR steel top, a Ø16 mm clamping system with 50 mm spacing, and a 150 mm peripheral edge.
Available as a top only or as a complete table, in kit form or welded, it allows everyone to choose the level of preparation corresponding to their equipment, budget, and desire to participate in the manufacturing process.
Supported by six 60 × 60 mm square steel tube legs distributed along its entire length, it is designed for workshops regularly working on long and demanding parts.
4A Métal Welding Table – 900 × 2400 mm
French Manufacturing • 6 mm Steel • Ø16 mm Clamping • Long Format